Emulex 110 Guia de Instalação descarregar pdf (Página 83)

Installing Windows on an external SAN disk using an EFI RAMDISK

Installation and Configuration

You should see the message noting the driver has loaded

successfully. To locate the new RAMDISK, type Exit and press

Enter. From the system Boot Manager menu, select EFI Shell to

return to the EFI Shell. The device map should now show a new

FS device and the previous USB device.

Note: The order of devices may have shifted with the discovery of the

RAMDISK.

Fs0: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1)

Fs1: Acpi (PNP0A03,0)/Pci (1D|1)/Usb(1,0)/HD(Part1,Sig0D0C0B0A)

In the above example, the RAMDISK is now Fs0. Now you can

copy your driver files for your adapter to the RAMDISK. Switch

to your USB flash drive with the driver files and copy the files to

the RAMDISK by using the copy command. As with DOS, the

copy command can use an asterisk to grab multiple files, (i.e.,

Copy *.* fs0:). Once the files are copied to the RAMDISK, proceed

to install Windows. The ramdisk will automatically install the

adapter driver files necessary for booting for SAN.

Note: If the server is rebooted at any time, this procedure will need to be

repeated because the RAMDISK is deleted during a reboot.

8. Start the Windows installation by changing to the CD or DVD

drive by typing in the corresponding FS number, followed by a

colon (i.e., FS0:). It will be an fsx entry similar to the following:

fs1:Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)/CDROM(Entry0)

9. At this screen type setupldr.efi. The Windows Installation will

start. Do not hit F6 when prompted. The Welcome Setup screen

opens prompting you to select Enter. Select Enter.

10. Depending on the version of Windows that is being installed, a

screen with the following text may appear:

Windows Setup can automatically configure most aspects of your

installation, requiring little or no input from you. If you are configuring

a computer with no local monitor or keyboard, you must use this feature

or setup will not complete.

If you would like to use this feature, please press ENTER now.

If you would like to proceed with a manual installation, please press the

C key now.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 83