Emulex 110 Guia de Instalação descarregar pdf (Página 32)

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Installation and Configuration

◆ “Updating the adapter firmware using the HBAnyware utility”

on page 109

◆ “Installing Fibre Channel firmware on an Emulex CNA” on

page 120

ELXCFG and LPUTIL can be used as well, but are not covered in this

guide. For general use instructions of these utilities, refer to Emulex

documentation or “ELXCFG.EXE” on page 195.

Upgrading using a DOS boot diskette

This section deals exclusively with Emulex' former DOS utility,

LP6DUTIL.EXE. This utility was formerly packaged with firmware

and BIOS packages to allow users to perform HBA maintenance and

code loads from DOS.

This LP6DUTIL.EXE utility is no longer packaged with code from

Emulex, but there is currently a DOS Offline Utility kit and manual

available to do wnload from the Emulex website:

http://www.emulex.com/downloads/emulex/cnas-and-hbas/utilities/offline-utilities

If you are in need of a DOS utility to load Boot BIOS code to an HBA,

EMC recommends downloading and using this new DOS Offline

Utility. The user manual for this utility is also available at the above

Emulex website address. If possible, EMC recommends using the

Emulex HBAnyware utility to load HBA/CNA firmware and BIOS

code.

The Emulex CD-ROM contains the latest EMC-approved firmware

and BIOS files at the time of creation of the CD-ROM. If more recent

files exist, you can locate them on the Emulex website. Refer to

“Downloading latest Emulex drivers/firmware/BIOS files” on

page 20.

Follow these steps to upgrade the flash firmware from a

DOS-bootable diskette:

1. Format a 3.5-inch diskette to be system bootable and extract the

firmware and flash utility files from the archive file (.zip or

self-extracting .exe) onto the diskette. Ensure lp6dutil.exe and

the source files are in the same directory. (Refer to Table 2 on

page 31 to ensure the correct .ALL, .AWC, and/or *.PRG file is

used.)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 32