Emulex 110 Guia de Instalação descarregar pdf (Página 192)

192

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Miscellaneous Planning and Procedures

Editing the Windows time-out value

Note: This section applies only to driver version 2.11a2 and below; driver

versions above 2.11a2 include a version of the Emulex Configuration Tool

that automatically updates the Windows I/O time-out value.

Connecting a Windows 2000 host to an EMC storage array over Fibre

Channel requires editing the Windows registry as follows:

1. Open the registry:

a. On the Windows taskbar, click Start.

b. Click Run.

c. Type regedt32.exe in the Open field and click OK.

2. Follow this path:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\

Services\Disk

3. Look for the TimeOutValue entry in the right pane of the registry

editor window:

• If the TimeOutValue exists, double-click it, then go to step 4.

• If the TimeOutValue does not exist:

a. Select Add Value from the Edit menu.

b. In the Value Name box, type TimeOutValue (exactly as

shown).

c. For the data type, select REG_DWORD from the

pull-down menu.

d. Click OK, then go to step 4.

4. In the DWORD Editor window:

a. Click decimal in the radix box.

b. Change the value in the data box to 60.

5. Click OK.

6. Close the registry editor.

7. Reboot the host.

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 192