Emulex 110 Guia de Instalação descarregar pdf (Página 63)

Booting from the external storage array

Installation and Configuration

32. Press Enter twice to return to the EFI shell. The EFI shell can now

be exited, and the OS Installation can begin using the specified

array-based LUN as the boot volume.

Booting from SAN with HP Itanium servers with EMC storage

Setting up the server Before booting from a SAN, set up the server as follows:

1. Download and install the latest system firmware.

2. Remove the internal hard disks.

3. Record the WWN of each adapter port (each adapter should be

tagged).

4. Install all adapters and connect one port to be targeted for

booting.

Preparing the USB

drive

Files required for the installation can be downloaded onto a USB

drive. Download the following files using the links below and copy

to the USB drive.

◆ ramdisk.efi — Intel provides this tool in their EFI toolkit. The

toolkit in available for download at

http://www.intel.com/technology/efi in Tools\Application

Toolkit.

◆ diskpart.efi — This Intel provided disk utility can be found at

http://www.intel.com/technology/efi in the EFI Disk Utilities

link.

◆ EFI Boot code/utility for your adapter — This can be

downloaded from the EMC section at www.emulex.com.

◆ Adapter driver

a. Download the AutoPilot Install Kit from the EMC section at

www.emulex.com to a temporary directory on a computer, not

the USB drive. This file contains the Base driver and

HBAnyware utility.

b. After downloading the AutoPilot executable, select open to

start the installation.

c. Select Next and then Install to start the installation.

d. Uncheck the Start AutoPilot Installer checkbox and select

finish.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 63