Emulex 110 Guia de Instalação descarregar pdf (Página 46)

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Installation and Configuration

Note: If no numbered entries appear in the above figure, verify the

following:

• For VNX series or CLARiiON systems, verify that the single I/O path

points to the SP that owns the boot LUN.

• Verify that array LUN masking settings are configured such that this

adapter has visibility to the appropriate LUN. Refer to your array

software documentation for details.

17. Select the number that corresponds to the LUN to be used for

boot, and press Enter.

This displays a screen similar to Figure 22.

Figure 22 Selecting the boot method

18. Type the number that corresponds to your selection and press

Enter:

• In FC-SW environments, type 1 (Boot this device via WWPN).

• In FC-AL/direct-attach environments, type 2 (Boot this

device via DID).

This re-displays the list of saved boot devices. The first (Primary

Boot) entry identifies the WWN/DID of the array port and the

selected boot LUN, as shown in Figure 23 on page 47.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 46