Emulex 110 Guia de Instalação descarregar pdf (Página 24)

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Installation and Configuration

– SFP+ (Twinax cable)

5. Plug the other end of the cable into a connector on the storage

system or a hub/switch port. For FCoE switch connections, do

not connect cables to the switch port until the switch has been

properly configured.

6. Label each cable to identify the adapter and the

storage/switch/hub port to which it connects.

7. Reapply power and allow the system to boot normally.

Matching the adapter with the correct PCI slot

When choosing an adapter for your server, it is important to know

which adapter is compatible with your server's PCI/PCI-X/PCI

Express slots. Certain adapter models have specific voltage

requirements or physical limitations that allow them to work only in

specific slots.

Servers have several different bus slot types for accepting adapters:

◆ PCI

◆ PCI-X

◆ PCI-X 2.0

◆ PCI-Express

PCI slots can be 32-bit and 64-bit (denoted by their 124-pin or 188-pin

connectors.) These slots have plastic "keys" that prevent certain

adapters from fitting into them. These keys work with the cutout

notches in the adapter edge connector so only compatible adapters

will fit into them. This is done because of the voltage characteristics

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 24