Emulex 110 Guia de Instalação descarregar pdf (Página 22)

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Installation and Configuration

Installing the adapter

Follow this procedure to install an Emulex adapter in your server.

Note: Newer adapters do not require this first jumper step. Proceed to step 2.

1. For older adapter models, set the adapter jumpers as shown in

the following figure to enable it for use with the Windows host.

Note: The LP850-EMC has no user-configurable jumpers.

Figure 2 Jumpers on Emulex adapters

2. With host system power removed, install the adapter card and

cables as instructed in the server documentation. The card installs

into a single slot.

3. (Optical cable only) Remove the protective covers on each

fiber-optic cable.

4. Plug one end of the cable into the connector on the adapter as

shown in the appropriate figure under this step. (The hardware

might be rotated 90 degrees clockwise from the orientation

shown.)

• Fibre Channel adapter connectivity options include copper

cable with DB9 connector, SC optical, and LC optical cable, as

shown next.

321321

JX2 JX1

LP7000E-EMC

321321

JX1 JX2

LP8000-EMC

LP9002-E

LP9802/DC-E

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 22