Emulex 110 Guia de Instalação descarregar pdf (Página 199)

Using the Emulex configuration tool

199

Miscellaneous Planning and Procedures

◆ EMC fabric without EMC PowerPath/ATF

(InitLinkFlags=0x00000002 (fabric, auto-link speed),

WaitReady=45, LinkDown=45)

◆ EMC fabric with EMC PowerPath/ATF

(InitLinkFlags=0x00000002 (fabric, auto-link speed),

WaitReady=10, LinkDown=10)

ELXCFG.EXE v1.41a10 enables adapter settings to connect to a

Symmetrix, VNX series, or CLARiiON from the same host while

using the same adapter. This version is distributed with the 2.20a12

and 2.21a0 drivers and is installed from the included Application Kit.

Starting with this version of the configuration tool, as part of a visual

change only, the EMC settings will no longer mask out the

reconfigured generic checkbox options.

To enable custom EMC array configuration settings, a user must start

the utility with a command line option of -- emc. Refer to “Updating

the shortcut” on page 203.

The EMC array auto-configuration settings are no longer presented

automatically as the configuration tool will no longer auto-detect if

an EMC array is present on the fabric. If the -- emc option is enabled,

the configuration tool will automatically mask some of the checkbox

selections, and will present a four-choice EMC array

auto-configuration dialog box under the Configuration-Set menu.

These settings noted below are modified for the global driver defaults

and apply to all adapters in the system. This enables the same

adapter to connect to a Symmetrix, VNX series, or CLARiiON from

the same host while using the same adapter.

The EMC choices will reset the link-speed to Auto. Manually

modifying the link-speed later will no longer remove the checkbox

from the EMC auto-configuration choices.

All adapter global settings are Emulex defaults, with the exception of

the following:

◆ MaximumQueueDepth=32, MaximumLun=255,

UniqueNodeWwns=1,

ShowUnknowns=1, MultipleScsiClaims=1, BrokenRscn=1,

Windows Disk Class Driver Timeout=60s

◆ EMC arbitrated loop without EMC PowerPath/ATF

(InitLinkFlags=0x00000000 (arbitrated loop, auto-link speed),

WaitReady=45, LinkDown=45, TranslateQueueFull=1)

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 199