Emulex 110 Guia de Instalação descarregar pdf (Página 200)

200

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Miscellaneous Planning and Procedures

◆ EMC arbitrated loop with EMC PowerPath/ATF

(InitLinkFlags=0x00000000 (arbitrated loop, auto-link speed),

WaitReady=10, LinkDown=10)

◆ EMC fabric without EMC PowerPath/ATF

(InitLinkFlags=0x00000002 (fabric, auto-link speed),

WaitReady=45, LinkDown=45, TranslateQueueFull=1)

◆ EMC fabric with EMC PowerPath/ATF

(InitLinkFlags=0x00000002 (fabric, auto-link speed),

WaitReady=10, LinkDown=10)

ELXCFG.EXE v1.41a13 ELXCFG.EXE v1.41a13 has the same settings

as v1.41a10, and is packaged with the 2.21a7 driver kit.

ELXCFG.EXE v1.41a14 enables adapter settings to connect to a

Symmetrix, VNX series, or CLARiiON from the same host while

using the same adapter. This version is distributed with the 2.22a8

driver and is installed from the included Application Kit.

To enable custom EMC array configuration settings, a user must start

the utility with a command line option of -- emc. Refer to “Updating

the shortcut” on page 203.

The EMC array auto-configuration settings are no longer presented

automatically as the configuration tool will no longer auto-detect if

an EMC array is present on the fabric. If the -- emc option is enabled,

the configuration tool will automatically mask some of the checkbox

selections, and will present a four-choice EMC array

auto-configuration dialog box under the Configuration-Set menu.

These settings noted below are modified for the global driver defaults

and apply to all adapters in the system. This enables the same

adapter to connect to a Symmetrix, VNX series, or CLARiiON from

the same host while using the same adapter. The EMC choices will

reset the link-speed to Auto. Manually modifying the link-speed later

will no longer remove the checkbox from the EMC

auto-configuration choices.

All adapter global settings are Emulex defaults, with the exception of

the following:

◆ MaximumQueueDepth=32, MaximumLun=255,

UniqueNodeWwns=1,

ShowUnknowns=1, MultipleScsiClaims=1,BrokenRscn=1,

Windows Disk

Class Driver Timeout=60s

◆ EMC arbitrated loop without EMC PowerPath/ATF

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 239 240

Sem comentários

Emulex 110 Guia de Instalação Página 200