Emulex LP9802DC Manual do Utilizador descarregar pdf (Página 27)

Driver for HP-UX - Troubleshooting Section Page 24

lpfcN: 17: Ran out of Node Table entries

DESCRIPTION: The driver maintains a node table with one entry for every device it needs to

communicate with on the Fibre Channel network. The number of table entries and the PortID for the

device that failed are recorded. This message will be a warning / verbose if the driver can free up some

unused node table entries.

LOG: ERROR always fcrpib.c

ACTION: Reduce the number of devices in your Fibre Channel network. If problems persist report these

errors to Technical Support.

lpfcN: 18: Device Discovery Started

DESCRIPTION: Device discovery / rediscovery after FLOGI or FAN has started. The location within the

driver is recorded.

LOG: WARNING DISCOVERY verbose fcrpib.

ACTION: none needed.

lpfcN: 19: Stray FCP Completion

DESCRIPTION: Received an FCP command completion without issuing a corresponding FCP

Command (based on the iotag field in the FCP iocb). The IOCB command, IOCB status, IOCB

parameter and iotag used to match are recorded.

LOG: ERROR always fcscsib.c

ACTION: This error could indicate a software driver or firmware problem. If problems persist report

these errors to customer service.

lpfcN: 20: FCP completion error

DESCRIPTION: An FCP command completed with a status error in the IOCB. The IOCB status, the

IOCB parameter error, as well as the PortID this FCP command was directed to are recorded.

LOG: ERROR always fcscsib.

ACTION: If there are many errors to one device, check physical connections to Fibre Channel network

and the state the remote PortID is in.

lpfcN: 24: Command ring timeout

DESCRIPTION: An IOCB command was posted to a ring and did not complete within a timeout based

on ratov. The ring number and the IOCB command are recorded.

LOG: ERROR always fcscsib.c

ACTION: This error could indicate a software driver or firmware problem. If no I/O is going through the

adapter, reboot the system. If these problems persist, report the errors to Technical Support.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Sem comentários

Emulex LP9802DC Manual do Utilizador Página 27