Emulex ONECONNECT OCE10102-F Guia do Utilizador descarregar pdf (Página 20)

Use the following command to change the setting values when the driver parameter name is

"lpfcX_lun_queue_depth", the number of I/Os is "20", the module name is "lpfc820", and the number of

ports is "2".

# esxcli system module parameters set -p "lpfc0_lun_queue_depth=20 lpfc1_lun_queue_depth=20" -m lpfc820

Input the number of I/Os ("20" in this example) for each driver parameter setting.

5 Reboot VMware ESXi.

# reboot

6 After rebooting VMware ESXi, check the setting values.

# esxcli system module parameters list -m lpfc820 | grep lpfc[0-1]_lun_queue_depth

lpfc0_lun_queue_depth int 20 Max number of FCP commands we can queue to a specific LUN

lpfc1_lun_queue_depth int 20 Max number of FCP commands we can queue to a specific LUN

1.2.4.3 For VMware vSphere 4

1 Record the module name for the Converged Network Adapter card that is loaded into VMware ESX.

The underlined portion indicates the loaded module name. In the following example, "lpfc820" is the

module name.

# vmkload_mod -l | grep lpfc*

lpfc820

Module names may vary depending on the Converged Network Adapter card that is used.

2 Check the default value for the Converged Network Adapter card.

Specify the module name for the Converged Network Adapter card that you recorded in Step 1 and

check the default value.

# esxcfg-module -g lpfc820

lpfc820 enabled = 1 options = ' '

Check that no value appears in the underlined portion.

3 Check the number of ports on the Converged Network Adapter card.

The SCSI Host numbers of the Converged Network Adapter card that are displayed represent the number

of ports.

Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards

1.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sem comentários

Emulex ONECONNECT OCE10102-F Guia do Utilizador Página 20