Emulex ONECONNECT OCE10102-F Guia do Utilizador descarregar pdf (Página 16)

11 Set the "Boot number". Select the boot device startup method (via WWPN or via DID), and change the

setting.

Input "Boot this device via WWPN" for WWPN in this example.

Press <Alt E> to go to Emulex BIOS Utility.

Press <s> to skip Emulex BIOS.

---------------------------------------------------

DID:xxxxxx WWPN:xxxxxxxx xxxxxxxx LUN:00

Boot this device via WWPN

Boot this device via DID

<ESC> to Previous Menu

/ > to Highlight, <Enter> to Select

---------------------------------------------------

===> Boot this device via WWPN

12 The window shown in Step 7 reappears.Check the settings.

In this example, check that item #1 is listed as "Used", that the "WWPN" is set to the actual ETERNUS

DX400 series WWPN, and that the "LUN" is set to "00" and that it bears the "Primary Boot" label.

-------------------------------------------------------------------------------

Emulex OneConnect FCoE BIOS Utility, xxxxxxxx

-------------------------------------------------------------------------------

01: OCexxxxx-F: Bus#: xx Dev#: xx Func#: xx

Mem Base: CD4C0000 Firmware Version: xxx.xxx BIOS: Enabled!

Port Name: xxxxxxxx xxxxxxxx Node Name: xxxxxxxx xxxxxxxx

Vlan ID: xxxx DCBX mode: CEE mode

-------------------------------------------------------------------------------

List of Saved Boot Devices:

1. Used DID:xxxxxx WWPN:2040000B 5D6A0012 LUN:00 Primary Boot

2. Unused DID:000000 WWPN:00000000 00000000 LUN:00

3. Unused DID:000000 WWPN:00000000 00000000 LUN:00

4. Unused DID:000000 WWPN:00000000 00000000 LUN:00

5. Unused DID:000000 WWPN:00000000 00000000 LUN:00

6. Unused DID:000000 WWPN:00000000 00000000 LUN:00

7. Unused DID:000000 WWPN:00000000 00000000 LUN:00

8. Unused DID:000000 WWPN:00000000 00000000 LUN:00

/ > to Highlight, <Enter> to Select

-------------------------------------------------------------------------------

===> Enter <Esc> to Previous Menu

13 Press the [Esc] key twice to return to the window shown in Step 2.

If the Converged Network Adapter card has a dual port, or if multiple Converged Network Adapter cards

to be installed, repeat Step 2 through Step 13.

14 Press the [Esc] key to reboot.

--------------------------------------------------------

Your changes have been saved.

Reboot the system for all changes to take effect.

REBOOT THE SYSTEM? (Y/N):

--------------------------------------------------------

===> Y

Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards

1.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comentários a estes Manuais

Sem comentários

Emulex ONECONNECT OCE10102-F Guia do Utilizador Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Emulex ONECONNECT OCE10102-F