Emulex LP21000 Manual do Utilizador descarregar pdf (Página 206)

The OneCommand Manager User Manual Page 196

SetPortEnabled

Supported by: Windows, Solaris, Linux and VMware ESX

Syntax:

hbacmd SetPortEnabled <WWPN|MAC> <PortEnable>

Description: This command enables or disables the FC or CNA port.

Parameters:

WWPN - Adapter’s WWPN

MAC - MAC address of the NIC or iSCSI port

PortEnable -

0 for Disable

1 for Enable

Authentication Commands

AuthConfigList

Supported by: Windows, Solaris and Linux

Syntax:

hbacmd AuthConfigList <WWPN>

Description: This command returns the list of WWPNs that have an authentication connection

configuration with the specified adapter.

Parameters:

WWPN - Adapter’s WWPN

DeleteAuthConfig

Supported by: Windows, Solaris and Linux

Syntax:

hbacmd DeleteAuthConfig <WWPN1> <WWPN2> <PasswordType> <Password>

Description: This command deletes the authentication configuration on the adapter.

Note: Ensure all I/O on the port is stopped, before disabling the port.

Note: When the SetPortEnabled command disables an FC port, the adapter must be

reset to activate the new setting. Only OneConnect™ adapters do not require a reset

when the adapter port is enabled or disabled.

Note: Authentication commands are supported on FC adapter ports only.

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 273 274

Sem comentários

Emulex LP21000 Manual do Utilizador Página 206